Actel Extends RTAX-S Family to Meet Industry Demand
New Radiation-Tolerant FPGA Represents ASIC Alternative for Space Designers with Moderate Density Requirements
MOUNTAIN VIEW, Calif., Feb. 11 /PRNewswire-FirstCall/ -- In response to the overwhelming interest in its high-performance, radiation-tolerant RTAX-S family, Actel Corporation today introduced the 250,000-gate RTAX250S field-programmable gate array (FPGA), extending the family to three devices ranging in density from 250,000 to 2-million equivalent system gates. The addition of the new lower density RTAX250S FPGA further enables Actel to provide access to all of the advantages of the RTAX-S solutions, including on-board memory, practical single-event upset (SEU) immunity, and an expanded set of I/O standards, to those space designers with moderate logic requirements. Combined with proven reliability at extreme temperatures and live at power-up functionality on a single chip, the product's advantages will enable the RTAX250S device, a radiation-tolerant alternative to application- specific integrated circuits (ASICs), to meet the density, performance and radiation-resistance requirements of many satellite bus and payload applications, such as command and data handling, attitude and orbit control, and management of spacecraft power and environmental controls.
"As a committed supplier of high-reliability products for the space community, we have been very pleased with the overwhelming interest in the RTAX-S FPGA family. Its unique feature set, such as SEU-hardened flip-flops and usable error-corrected on-board memory, combined with the inherent benefits of our nonvolatile products, gives designers the ability to reduce component count, minimize power consumption and save board space and weight while meeting their density, performance and radiation-resistance requirements," said Ken O'Neill, director, military and aerospace product marketing at Actel. "Further, with the new RTAX250S, we are able to extend the RTAX-S feature set to a smaller FPGA so that designers who need only a modest amount of logic can take advantage of the benefits of the family."
The RTAX-S devices offer inherent single-event latch-up (SEL) immunity; immunity to SEUs with an NLET threshold far greater than 37MeV-cm2/mg; and total ionizing dose (TID) performance in the region of 300 Krads. The family also features embedded RAM with an upset rate of <1E-10 errors/bit-day with error detection and correction (EDAC). With 250,000 system gates, or 30,000 ASIC-equivalent gates, the RTAX250S contains support for up to 54k bits of embedded SRAM, 248 user I/Os and 1,408 SEU-hardened registers.
RTAX-S Support
To enable board-level functional verification and simulation of production-qualified solutions, Actel offers RTAX250S prototyping capability via pin-compatible, commercial Axcelerator FPGAs. Actel's RTAX-S prototyping solution includes software support for EDAC intellectual property, which mitigates SEUs in the user memory. Application notes explaining how to design RTAX-S based applications using Axcelerator devices are available from Actel at http://www.actel.com/.
The RTAX-S family is supported by the Actel Libero integrated design environment and Actel Designer tool suite, which includes place and route, timing analysis and memory generation functionality. Additional support for the family is provided by industry-leading third-party tools from Model Technology, Mentor Graphics, Synplicity, Cadence Design Systems and Synopsys.
Pricing and Availability
Prototyping capability for the RTAX250S is currently available with production scheduled to begin in 2H 2004. Pricing for the RTAX250S will start at $3,980 for 25 units. For further information about pricing and availability, please contact Actel.
About Actel
Actel Corporation is a supplier of innovative programmable logic solutions, including field-programmable gate arrays (FPGAs) based on antifuse and flash technologies, high-performance intellectual property (IP) cores, software development tools and design services, targeted for the high-speed communications, application-specific integrated circuit (ASIC) replacement and radiation-tolerant markets. Founded in 1985, Actel employs more than 500 people worldwide. The Company is traded on the Nasdaq National Market under the symbol ACTL and is headquartered at 2061 Stierlin Court, Mountain View, CA, 94043-4655. Telephone: 888-99-ACTEL (992-2835). Internet: http://www.actel.com/ .
NOTE: The Actel name and logo, Libero and Designer are registered trademarks of Actel Corporation. All other trademarks and service marks are the property of their respective owners.
CONTACT: Clive Jones of Actel Corporation, +1-650-318-4523, or
clive.jones@actel.com; or Patty Ladegaard of Porter Novelli, +1-408-369-1500,
ext. 30, or patty.ladegaard@porternovelli.com, for Actel Corporation
Web site: http://www.actel.com/
|
